CONTRACT 7166 One Page Service AgreementDocusign Envelope ID:D07DD6D9-A2A4-4ABF-8E12-BB615271237B
0
Agreement No. 7166
w-Sell vices Agreement
CONTRACTOR: �1 I (lam' DATE: —Gl — 2oati—j
Below you will find a checklist relating to Insurance and other requirements that are required for doing business with the City of El
Segundo. Only those items checked -off are MANDATORY, however if your standard policies exceed the minimum requirements please
include, Commercial general Viability insurance must meet or exceed the requirements of ISO-CGL Form No. CG 20 10 1185 or
equivalent. The amount of insurance set forth below will be a combined single limit per occurrence for bodily injury, personal injury, and'
property damage for the policy coverage. Liability policies will be endorsed to name the City, its officials, and employees as
"additional insured"s" under said insurance coverage and to state that such insurance will be deemed "primary" such that any
other insurance that may be carried by the City will be excess thereto. Such insurance must be on an "occurrence," not a
"claims made," basis and will not be cancelable or subject to reduction except upon thirty (30) days prior written notice to the
City. Please find additional Terms and Conditions on the reverse side of this Services Agreement. This is not a purchase order or
an authorization to begin work.
® Corn rehensive General Liability, including coverage for premises, products and completed operations, independent contractors,
personal injury and contractual obligations with combined single limits of coverage of at least $1,000,000 per occurrence.
Auto L,iabili including owned, non -owned and hired vehicles with at least:
® $1,000,000 per occurrence.
❑ per occurrence.
❑ As required by State Statutes. A copy of your current policy must be submitted naming yourself and or your company.
® Workers" Compensation Insurance: as required by State Statutes with Waiver of Subro ation. (Not needed if Self-employed with
no employees and CONTRACTOR signs statement to this effect.)
® Business License: The CONTRACTOR shall agree to have a current City of El Segundo license on file at City Hall or purchase
said license (at no cost to the City).
❑ Permits: Plans must be approved and permit(s) issued (no fee) by the Planning and Building Safety if appropriate. Call the
Planning Manager @ (310) 524-2340 if you have questions.
❑ COD of valid Dicture LD, (Drivers license etc.)
PLEASE NOTE: ALL APPLICABLE INFORMATION LISTED ABOVE MUST BE OBTAINED AND ON FILE, PRIOR TO THE ISSUANCE OF A CITY
PURCHASE ORDER BEING SENT TO YOU (VIA FAX OR HARD COPY) BY THE PURCHASING AGENT, THUS AUTHORIZING COMMENCEMENT OF
WORK FOR THE CITY.
Submitted b com lets all blanks': CCIII.CI°t CCIII)I' III ICCiII"III;I Illt IIIIACI^( IC 1"'III°flI1 CIII"'I"' "
Company Name:
By (Print name & title): Mark smith General
Flock Group Inc„
Company Street Address:
Vendor's Authorized Signature required:
1170 Howell Mill Rd, Ste 210
16Z S.4
City, State, Zip: Atlanta GA 3031 B
Date signed: 12 9 2024
� �
Phone: (866) 901-1781
FAX:
Vendor's Email address:
Vendor's Web site:
support@flocksafety.com
www.flocksafety.com
counsel
Originator/Department Contact: I1 �(— / 01 Date initiated: 122 aL4
Department Head Approval:
Insurance ApprovL
,.
City T
Attorney City Manager
PDFConversion e5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Rev 4/4/24
City
Date Approved:
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
1.GENERALLY. The materials, supplies, or services (collectively,
"Purchase") covered by this services agreement and purchase order
("order") must be furnished by Seller subject to all the terms and
conditions contained in this order which Seller, in accepting this order,
agrees to be bound by and comply with in all particulars. No other terms
or conditions are binding upon the parties unless subsequently agreed to
in writing. Written acceptance or shipment of all or any portion of the
Purchase covered by this order constitutes unqualified acceptance of all
terms and conditions in this order. The terms of any proposal referred to
in this order are included and made a part of the order only to the extent
it specified the Purchase ordered, the price, and the delivery„ and then
only to the extent that such terms are consistent with the terms and
conditions of this order. The Parties agree that the Master Services
Agreement attached hereto supersedes all contemporaneous
negotiations, understandings, representations and agreements between
the Parties including this Agreement. To the extent of any inconsistency
or conflict between the Master Services Agreement, on one hand, and
this Agreement, on the other, the Master Services Agreement shall
control.
2.INSPECTION. The Purchase furnished must be exactly as specified in
this order, free from all defects in Seller's performance to the extent
commercially feasible, design, workmanship, and materials, and, except
as otherwise provided, is subject to inspection and test by City at all
times and places. If, before final acceptance, any Purchase is found to
be incomplete, or not as specified, City may reject it, require Seller to
correct it without charge, or require delivery of such Purchase at a
reduction in price that is equitable under the circumstances. If seller is
unabie or refuses to correct such items within a time deemed reasonable
by City, City may terminate the order in whole or in part. Seller bears all
risks as to rejected Purchases and, in addition to any costs for which
Seller may become liable to City under other provisions of this order,
must reimburse City for all transportation costs, other related costs
incurred„ or payments to Seller in accordance with the terms of this order
for unaccepted Purchases. Notwithstanding City's acceptance of any
Purchase, Seller is liable for latent defects, fraud, or such gross mistakes
as constitute fraud.
3.CHANGES. City may make changes within the general scope of this
order in drawings and specifications for specially manufactured supplies,
place of delivery, method of shipment or packing of the order if mutually
agreed upon by the Parties. If such changes affect the cost of or the
time required for performance of this order, an equitable adjustment in
the price or delivery or both must be made. No change by Seller is
allowed without City's written approval. Any claim by Seller for an
adjustment under this section must be made in writing within thirty (30)
days from the date of receipt by Seller of notification of such change
unless City waives this condition in writing. Nothing in this section
excuses Seller from proceeding with performance of the order as
changed.
4. TERMINATION. The Parties may terminate the Agreement in
accordance with the section 7.2 under the Master Services Agreement.
5.TERM 1 TIME EXTENSION. This Agreement's term is set forth in
section 7.1 under the Master Services Agreement.
&REMEDIES CUMULATIVE. City's rights and remedies under this order
are not exclusive and are in addition to any legal rights and remedies.
7.TITLE. Title to materials and supplies purchased under this order
pass directly from Seller to City upon City's written acceptance following
an actual inspection and City's opportunity to reject.
&PAYMENT. City will pay Seller in accordance with section 6 of the
Master Services Agreement.
9.INDEMNIFICATION. Seller agrees to indemnify and hold City
harmless consistent with section 9.3. under the Master Services
Agreement.
10.WARRANTY. Seller agrees that the Purchase is covered by the
warranty provided in section 8.3 of the Master Services Agreement.
11.ASSIGNMENT. City may assign this order. Except as to any
payment due under this order, Seller may not assign or subcontract the
order without City's written approval, which may not be unreasonably
withheld. Should City give consent, it will not relieve Seller from any
obligations under this order and any transferee or subcontractor will be
considered Seller's agent. Notwithstanding the foregoing, either Party
may assign this Agreement„ without the other Party's consent, (i) to any
parent, subsidiary, or affiliate entity„ or (fl) to any purchaser of all or
substantially all of such Party's assets or to any successor by way of
merger, consolidation or similar transaction.
12.INSURANCE. Seller must provide the insurance indicated on the
face sheet of this Services Agreement.
13.PERMITS. Seller must procure all necessary permits and licenses,
and abide by all federal, state, and local laws, for performing this order.
14.INDEPENDENT CONTRACTOR. City and Seller agree that Seller
will act as an independent contractor and will have control of all work
and the manner in which is it performed. Seller will be free to contract
for similar service to be performed for other employers while under
contract with City. Seller is not an agent or employee of City and is not
entitled to participate in any pension plan, insurance, bonus or similar
benefits City provides for its employees. Any provision in this order that
may appear to give City the right to direct Seller as to the details of doing
the work or to exercise a measure of control over the work means that
Seller will follow the direction of the City as to end results of the work
only.
15.WAIVER. City's review or acceptance of, or payment for, work
product prepared by Seller under this order will not be construed to
operate as a waiver of any rights City may have under this Agreement or
of any cause of action arising from Seller's performance. A waiver by
City of any breach of any term, covenant, or condition contained in this
order will not be deemed to be a waiver of any subsequent breach of the
same or any other term, covenant, or condition contained in this order,
whether of the same or different character.
16.INTERPRETATION. This Agreement was drafted in, and will be
construed in accordance with the laws of the State of California, and
exclusive venue for any action involving this agreement will be in Los
Angeles County.
17. ARTIFICIAL INTELLIGENCE.. Seller must not utilize, employ, or
incorporate any form artificial intelligence„ machine learning, or other
similar technologies (collectively, "At') in the provision of professional
services in this Agreement without City's express written consent. The Al
prohibition set forth directly above will not apply to general business
tools and software that may have At components but are not directly
involved in the execution or delivery of professional services that this
Agreement covers, provided that such tools and software do not
significantly impact the quality or nature of such services. Seller must
promptly notify City" in writing„ of any proposat to employ At in
connection its provision of services to the City under this Agreement.
City will have the sole discretion to grant or deny such proposal.
18. ELECTRONIC SIGNATURES, SIGNATURE AUTHORITY. In
accordance with Government Code §16.5, the parties agree that this
Amendment will be considered signed when the signature of a party is
delivered by electronic transmission. Such electronic signature will be
treated in all respects as having the same effect as an original signature.:
Seller warrants that its signatory (or sk natories, as applicable) to this
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Master Services Agreement
This Master Services Agreement (this "Agreement') is entered into by and between Flock Group, Inc. with a place
of business at 1170 Howell Mill Road NW Suite 210, Atlanta, GA 30318 ("Flock") and the entity identified in the signature
block ("Customer") (each a "Party," and together, the "Parties"). This Agreement is effective on the date of mutual
execution ("Effective Date"). Parties will sign an Order Form ("Order Form") which will describe the Flock Services to be
performed and the period for performance, attached hereto as Exhibit A.
RECITALS
WHEREAS, Flock offers a software and hardware situational awareness solution through Flock's technology
platform that upon detection is capable of capturing audio, video, image, and recording data and provide notifications to
Customer ("Notifications");
WHEREAS, Customer desires access to the Flock Services (defined below) on existing devices, provided by
Customer, or Flock provided Flock Hardware (as defined below) in order to create, view, search and archive Footage and
receive Notifications, via the Flock Services;
WHEREAS, Customer shall have access to the Footage in Flock Services. Pursuant to Flock's standard Retention
Period (defined below) Flock deletes all Footage on a rolling thirty (30) day basis, except as otherwise stated on the Order
Form. Customer shall be responsible for extracting, downloading and archiving Footage from the Flock Services on its own
storage devices; and
WHEREAS, Flock desires to provide Customer the Flock Services and any access thereto, subject to the terms and
conditions of this Agreement, solely for the awareness, prevention, and prosecution of crime, bona fide investigations and
evidence gathering for law enforcement purposes, ("Permitted Purpose").
1. DEFINITIONS
Certain capitalized terms, not otherwise defined herein, have the meanings set forth or cross-referenced in this Section 1.
1.1 "Agreement' means the order form (to be provided as Exhibit A, "Order Form"), these terms and conditions, and any
document therein incorporated by reference in section 11.4.
1.2 "Anonymized Data" means Customer Data permanently stripped of identifying details and any potential personally
identifiable information, by commercially available standards which irreversibly alters data in such a way that a data subject
(i.e., individual person or entity) can no longer be identified directly or indirectly.
1.3 "Authorized End User(s)" means any individual employees, agents, or contractors of Customer accessing or using the
Services, under the rights granted to Customer pursuant to this Agreement.
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
1.4 "Customer Data" means the data, media, and content provided by Customer through the Services. For the avoidance of
doubt, the Customer Data will include the Footage.
1.5. "Customer Hardware" means the third -party camera owned or provided by Customer and any other physical elements
that interact with the Embedded Software and the Web Interface to provide the Services.
1.6 "Effective Date" means the date this Agreement is mutually executed (valid and enforceable) by both Parties.
1.7 "Embedded Software" means the Flock proprietary software and/or firmware integrated with or installed on the Flock
Hardware or Customer Hardware.
1.8 "Flock Hardware" means the Flock device(s), which may include the pole, clamps, solar panel, installation components,
and any other physical elements that interact with the Embedded Software and the Web Interface, to provide the Flock
Services as specifically set forth in the applicable Order Form.
1.9 "Flock IF" means the Services, the Embedded Software, and any intellectual property or proprietary information therein
or otherwise provided to Customer and/or its Authorized End Users. Flock IP does not include Footage (as defined below).
1.10 "Flock Services" means the provision of Flock's software and hardware situational awareness solution, via the Web
Interface, for automatic license plate detection, alerts, audio detection, searching image records, video and sharing
Footage.
1.11 "Footage" means still images, video, audio, and other data captured by the Flock Hardware or Customer Hardware in
the course of and provided via the Flock Services.
1.12 "Installation Services" means the services provided by Flock for installation of Flock Services.
1.13 "Permitted Purpose" means for legitimate public safety and/or business purpose, including but not limited to the
awareness, prevention, and prosecution of crime; investigations; and prevention of commercial harm, to the extent
permitted by law.
1.14 "Retention Period' means the time period that the Customer Data is stored within the cloud storage, as specified in
the applicable Order Form. Flock deletes all Footage on a rolling thirty (30) day basis, except as otherwise stated on the
Order Form. Customer shall be responsible for extracting, downloading and archiving Footage from the Flock Services on
its own storage devices.
1.15 "Term" means the date, unless otherwise stated in the Order Form, upon which the cameras are validated by both
Parties as operational.
1.16 "Web Interface" means the website(s) or application(s) through which Customer and its Authorized End Users can
access the Services.
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
2. SERVICES AND SUPPORT
2.1 Provision of Access. Flock hereby grants to Customer a non-exclusive, non -transferable right to access the features
and functions of the Flock Services via the Web Interface during the Term, solely for the Authorized End Users. The
Footage will be available for Authorized End Users to access and download via the Web Interface for the Retention Period.
Authorized End Users will be required to sign up for an account and select a password and username ("User ID"). Customer
shall be responsible for all acts and omissions of Authorized End Users. Customer shall undertake reasonable efforts to
make all Authorized End Users aware'of all applicable provisions of this Agreement and shall cause Authorized End Users
to comply with such provisions. Flock may use the services of one or more third parties to deliver any part of the Flock
Services, (such as using a third party to host the Web Interface for cloud storage or a cell phone provider for wireless
cellular coverage).
2.2 Embedded Software License. Flock grants Customer a limited, non-exclusive, non -transferable, non-sublicensable
(except to the Authorized End Users), revocable right to use the Embedded Software as it pertains to Flock Services, solely
as necessary for Customer to use the Flock Services.
2.3 Support Services. Flock shall monitor the Flock Services, and any applicable device health, in order to improve
performance and functionality. Flock will use commercially reasonable efforts to respond to requests for support within
seventy-two (72) hours. Flock will provide Customer with reasonable technical and on -site support and maintenance
services in -person, via phone or by email at suipport fiocksafet .cony (such services collectively referred to as "Support
Services').
2.4 Updates to Platform. Flock may make any updates to system or platform that it deems necessary or useful to (i)
maintain or enhance the quality or delivery of Flock's products or services to its agencies, the competitive strength of, or
market for, Flock's products or services, such platform or system's cost efficiency or performance, or (ii) to comply with
applicable law. Parties understand that such updates are necessary from time to time and will not diminish the quality of the
services or materially change any terms or conditions within this Agreement.
2.5 Service Interruption. Services may be interrupted in the event that: (a) Flock's provision of the Services to Customer or
any Authorized End User is prohibited by applicable law; (b) any third -party services required for Services are interrupted;
(c) if Services are being used for malicious, unlawful, or otherwise unauthorized use; (d) there is a threat or attack on any of
the Flock IP by a third party; or (e) scheduled or emergency maintenance ("Service Interruption"). Flock will make
commercially reasonable efforts to provide written notice of any Service Interruption to Customer, to provide updates, and to
resume providing access to Flock Services as soon as reasonably possible after the event giving rise to the Service
Interruption is cured. Flock will have no liability for any damage, liabilities, losses (including any loss of data or profits), or
any other consequences that Customer or any Authorized End User may incur as a result of a Service Interruption. To the
extent that the Service Interruption is not caused by Customer's direct actions or by the actions of parties associated with
the Customer, the time will be tolled by the duration of the Service Interruption (for any continuous suspension lasting at
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
least one full day). For example, in the event of a Service Interruption lasting five (5) continuous days, Customer will receive
a credit for five (5) free days at the end of the Term.
2.6 Service Suspension. Flock may temporarily suspend Customer's and any Authorized End User's access to any portion
or all of the Flock IP or Flock Service if (a) there is a threat or attack on any of the Flock IP by Customer; (b) Customer's or
any Authorized End User's use of the Flock IP disrupts or poses a security risk to the Flock IP or any other customer or
vendor of Flock; (c) Customer or any Authorized End User is/are using the Flock IP for fraudulent or illegal activities; (d)
Customer has violated any term of this provision, including, but not limited to, utilizing Flock Services for anything other than
the Permitted Purpose; or (e) any unauthorized access to Flock Services through Customer's account ("Service
Suspension"). Customer shall not be entitled to any remedy for the Service Suspension period, including any
reimbursement, tolling, or credit. If the Service Suspension was not caused by Customer, the Term will be tolled by the
duration of the Service Suspension.
2.7 Hazardous Conditions. Flock Services do not contemplate hazardous materials, or other hazardous conditions,
including, without limit, asbestos, lead, or toxic or flammable substances. In the event any such hazardous materials are
discovered in the designated locations in which Flock is to perform services under this Agreement, Flock shall have the right
to cease work immediately.
3. CUSTOMER OBLIGATIONS
3.1 Customer Obligations. Flock will assist Customer Authorized End Users in the creation of a User ID. Authorized End
Users agree to provide Flock with accurate, complete, and updated registration information. Authorized End Users may not
select as their User ID, a name that they do not have the right to use, or any other name with the intent of impersonation.
Customer and Authorized End Users may not transfer their account to anyone else without prior written permission of Flock.
Authorized End Users shall not share their account username or password information and must protect the security of the
username and password. Unless otherwise stated and defined in this Agreement, Customer shall not designate Authorized
End Users for persons who are not officers, employees, or agents of Customer. Authorized End Users shall only use
Customer -issued email addresses for the creation of their User ID. Customer is responsible for any Authorized End User
activity associated with its account. Customer shall ensure that Customer provides Flock with up-to-date contact information
at all times during the Term of this agreement. Customer shall be responsible for obtaining and maintaining any equipment
and ancillary services needed to connect to, access or otherwise use the Flock Services (e.g., laptops, internet connection,
mobile devices, etc.). Customer shall (at its own expense) provide Flock with reasonable access and use of Customer
facilities and Customer personnel in order to enable Flock to perform Services (such obligations of Customer are collectively
defined as "Customer Obligations'l.
3.2 Customer Representations and Warranties. Customer represents, covenants, and warrants that Customer shall use
Flock Services only in compliance with this Agreement and all applicable laws and regulations, including but not limited to
any laws relating to the recording or sharing of data, video, photo, or audio content.
4. DATA USE AND LICENSING
P D F Conversion e5 b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
4.1 Customer Data. As between Flock and Customer, all right, title and interest in the Customer Data, belong to and are
retained solely by Customer. Customer hereby grants to Flock a limited, non-exclusive, royalty -free, irrevocable, worldwide
license to use the Customer Data and perform all acts as may be necessary for Flock to provide the Flock Services to
Customer. Flock; does not own and shall not sell Customer Data.
4.2 Customer Generated Data. Flock may provide Customer with the opportunity to post, upload, display, publish,
distribute, transmit, broadcast, or otherwise make available, messages, text, illustrations, files, images, graphics, photos,
comments, sounds, music, videos, information, content, ratings, reviews, data, questions, suggestions, or other information
or materials produced by Customer ("Customer Generated Data'). Customer shall retain whatever legally cognizable
right, title, and interest in Customer Generated Data. Customer understands and acknowledges that Flock has no obligation
to monitor or enforce Customer's intellectual property rights of Customer Generated Data. Customer grants Flock a non-
exclusive, irrevocable, worldwide, royalty -free, license to use the Customer Generated Data for the purpose of providing
Flock Services. Flock does not own and shall not sell Customer Generated Data.
4.3 Anonymized Data. Flock shall have the right to collect, analyze, and anonymize Customer Data and Customer
Generated Data to the extent such anonymization renders the data non -identifiable to create Anonymized Data to use and
perform the Services and related systems and technologies, including the training of machine learning algorithms. Customer
hereby grants Flock a non-exclusive, worldwide, perpetual, royalty -free right to use and distribute such Anonymized Data to
improve and enhance the Services and for other development, diagnostic and corrective purposes, and other Flock
offerings. Parties understand that the aforementioned license is required for continuity of Services. Flock does not own and
shall not sell Anonymized Data.
5. CONFIDENTIALITY; DISCLOSURES
5.1 Confidentiality. To the extent required by any applicable public records requests, each Party (the "Receiving Party')
understands that the other Party (the "Disclosing Party") has disclosed or may disclose business, technical or financial
information relating to the Disclosing Party's business (hereinafter referred to as "Proprietary Information" of the
Disclosing Party). Proprietary Information of Flock includes non-public information regarding features, functionality and
performance of the Services. Proprietary Information of Customer includes non-public data provided by Customer to Flock
or collected by Flock via Flock Services, which includes but is not limited to geolocation information and environmental data
collected by sensors. The Receiving Party agrees: (i) to take the same security precautions to protect against disclosure or
unauthorized use of such Proprietary Information that the Party takes with its own proprietary information, but in no event
less than commercially reasonable precautions, and (ii) not to use (except in performance of the Services or as otherwise
permitted herein) or divulge to any third person any such Proprietary Information. The Disclosing Party agrees that the
foregoing shall not apply with respect to any information that the Receiving Party can document (a) is or becomes generally
available to the public; or (b) was in its possession or known by it prior to receipt from the Disclosing Party; or (c) was
rightfully disclosed to it without restriction by a third party; or (d) was independently developed without use of any
Proprietary Information of the Disclosing Party. Nothing in this Agreement will prevent the Receiving Party from disclosing
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
the Proprietary Information pursuant to any judicial or governmental order, provided that the Receiving Party gives the
Disclosing Party reasonable prior notice of such disclosure to contest such order. At the termination of this Agreement, all
Proprietary Information will be returned to the Disclosing Party, destroyed or erased (if recorded on an erasable storage
medium), together with any copies thereof, when no longer needed for the purposes above, or upon request from the
Disclosing Party, and in any case upon termination of the Agreement. Notwithstanding any termination, all confidentiality
obligations of Proprietary Information that is trade secret shall continue in perpetuity or until such information is no longer
trade secret.
5.2 Usage Restrictions on Flock IP. Flock and its licensors retain all right, title and interest in and to the Flock IP and its
components, and Customer acknowledges that it neither owns nor acquires any additional rights in and to the foregoing not
expressly granted by this Agreement. Customer further acknowledges that Flock retains the right to use the foregoing for
any purpose in Flock's sole discretion. Customer and Authorized End Users shall not: (i) copy or duplicate any of the Flock
IP; (ii) decompile, disassemble, reverse engineer, or otherwise attempt to obtain or perceive the source code from which
any software component of any of the Flock IP is compiled or interpreted, or apply any other process or procedure to derive
the source code of any software included in the Flock IP; (iii) attempt to modify, alter, tamper with or repair any of the Flock
IP, or attempt to create any derivative product from any of the foregoing; (iv) interfere or attempt to interfere in any manner
with the functionality or proper working of any of the Flock IP; (v) remove, obscure, or alter any notice of any intellectual
property or proprietary right appearing on or contained within the Flock Services or Flock IP; (vi) use the Flock Services for
anything other than the Permitted Purpose; or (vii) assign, sublicense, sell, resell, lease, rent, or otherwise transfer, convey,
pledge as security, or otherwise encumber, Customer's rights. There are no implied rights.
5.3 Disclosure of Footage. Subject to and during the Retention Period, Flock may access, use, preserve and/or disclose
the Footage to law enforcement authorities, government officials, and/or third parties, if legally required to do so or if Flock
has a good faith belief that such access, use, preservation or disclosure is reasonably necessary to comply with a legal
process, enforce this Agreement, or detect, prevent or otherwise address security, privacy, fraud or technical issues, or
emergency situations.
6. PAYMENT OF FEES
6.1 Billing and Payment of Fees. Customer shall pay the fees set forth in the applicable Order Form based on the billing
structure and payment terms as indicated in the Order Form. To the extent the Order Form is silent, Customer shall pay all
invoices net thirty (30) days from the date of receipt. If Customer believes that Flock has billed Customer incorrectly,
Customer must contact Flock no later than thirty (30) days after the closing date on the first invoice in which the error or
problem appeared to receive an adjustment or credit. Customer acknowledges and agrees that a failure to contact Flock
within this period will serve as a waiver of any claim. If any undisputed fee is more than thirty (30) days overdue, Flock may,
without limiting its other rights and remedies, suspend delivery of its service until such undisputed invoice is paid in full.
Flock shall provide at least thirty (30) days' prior written notice to Customer of the payment delinquency before exercising
any suspension right.
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
6.2 Notice of Changes to Fees. In the event of any changes to fees, Flock shall provide Customer with sixty (60) days'
notice (email sufficient) prior to the end of the Initial Term or Renewal Term (as applicable). Any such changes to fees shall
only impact subsequent Renewal Terms.
6.3 Taxes. To the extent Customer is not a tax exempt entity, Customer is responsible for all taxes, levies, or duties,
excluding only taxes based on Flock's net income, imposed by taxing authorities associated with the order. If Flock has the
legal obligation to pay or collect taxes, including amount subsequently assessed by a taxing authority, for which Customer is
responsible, the appropriate amount shall be invoice to and paid by Customer unless Customer provides Flock a legally
sufficient tax exemption certificate and Flock shall not charge Customer any taxes from which it is exempt. If any deduction
or withholding is required by law, Customer shall notify Flock and shall pay Flock any additional amounts necessary to
ensure that the net amount that Flock receives, after any deduction and withholding, equals the amount Flock would have
received if no deduction or withholding had been required.
7. TERM AND TERMINATION
7.1 Term. The initial term of this Agreement shall be for the period of time set forth on the Order Form (the "Term"). Unless
otherwise indicated on the Order Form, the Term shall commence upon first installation of Flock Hardware, as applicable.
Following the Term, unless otherwise indicated on the Order Form, this Agreement will automatically renew for successive
renewal terms of the greater of one year or the length set forth on the Order Form (each, a "Renewal Term") unless either
Party gives the other Party notice of non -renewal at least thirty (30) days prior to the end of the then -current term.
7.2 Termination. Upon termination or expiration of this Agreement, Flock will remove any applicable Flock Hardware at a
commercially reasonable time period. In the event of any material breach of this Agreement, the non -breaching Party may
terminate this Agreement prior to the end of the Term by giving thirty (30) days prior written notice to the breaching Party;
provided, however, that this Agreement will not terminate if the breaching Party has cured the breach prior to the expiration
of such thirty (30) day period ("Cure Period'). Either Party may terminate this Agreement (i) upon the institution by or
against the other Party of insolvency, receivership or bankruptcy proceedings, (ii) upon the other Parry's making an
assignment for the benefit of creditors, or (iii) upon the other Party's dissolution or ceasing to do business. In the event of a
material breach by Flock, and Flock is unable to cure within the Cure Period, Flock will refund Customer a pro-rata portion
of the pre -paid fees for Services not received due to such termination.
7.3 Survival. The following Sections will survive termination:1, 3, 5, 6, 7, 8.3, 8.4, 9, 11.1 and 11.6.
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
REMEDY FOR DEFECT; WARRANTY AND DISCLAIMER
8.1 Manufacturer Defect. Upon a malfunction or failure of Flock Hardware or Embedded Software (a "Defect'), Customer
must notify Flock's technical support team. In the event of a Defect, Flock shall make a commercially reasonable attempt to
repair or replace the defective Flock Hardware at no additional cost to the Customer. Flock reserves the right, in its sole
discretion, to repair or replace such Defect, provided that Flock shall conduct inspection or testing within a commercially
reasonable time, but no longer than seven (7) business days after Customer gives notice to Flock.
8.2 Replacements. In the event that Flock Hardware is lost, stolen, or damaged, Customer may request a replacement of
Flock Hardware at a fee according to the reinstall fee schedule (https,-)/www.flocksafe:ty.coinl'reinstall-fee-sched . In the
event that Customer chooses not to replace lost, damaged, or stolen Flock Hardware, Customer understands and agrees
that Flock is not liable for any resulting impact to Flock service, nor shall Customer receive a refund for the lost, damaged,
or stolen Flock Hardware.
8.3 Warranty. Flock shall use reasonable efforts consistent with prevailing industry standards to maintain the Services in a
manner which minimizes errors and interruptions in the Services and shall perform the Installation Services in a professional
and workmanlike manner. Services may be temporarily unavailable for scheduled maintenance or for unscheduled
emergency maintenance, either by Flock or by third -party providers, or because of other causes beyond Flock's reasonable
control, but Flock shall use reasonable efforts to provide advance notice in writing or by e-mail of any scheduled service
disruption.
8.4 Disclaimer. THE REMEDY DESCRIBED IN SECTION 8.1 ABOVE IS CUSTOMER'S SOLE REMEDY, AND FLOCK'S
SOLE LIABILITY, WITH RESPECT TO DEFECTS. FLOCK DOES NOT WARRANT THAT THE SERVICES WILL BE
UNINTERRUPTED OR ERROR FREE; NOR DOES IT MAKE ANY WARRANTY AS TO THE RESULTS THAT MAY BE
OBTAINED FROM USE OF THE SERVICES. EXCEPT AS EXPRESSLY SET FORTH IN THIS SECTION, THE SERVICES
ARE PROVIDED "AS IS" AND FLOCK DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS
DISCLAIMER ONLY APPLIES TO THE EXTENT ALLOWED BY THE GOVERNING LAW OF THE STATE MENTIONED IN
SECTION 11.6.
8.5 Insurance. Flock will maintain commercial general liability policies as stated in Exhibit B.
8.6 Force Majeure. Parties are not responsible or liable for any delays or failures in performance from any cause beyond
their control, including, but not limited to acts of God, changes to law or regulations, embargoes, war, terrorist acts,
pandemics (including the spread of variants), issues of national security, acts or omissions of third -party technology
providers, riots, fires, earthquakes, floods, power blackouts, strikes, supply chain shortages of equipment or supplies,
financial institution crisis, weather conditions or acts of hackers, internet service providers or any other third party acts or
omissions.
9. LIMITATION OF LIABILITY; INDEMNITY
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
9.1 Limitation of Liability. NOTWITHSTANDING ANYTHING TO THE CONTRARY, FLOCK, ITS OFFICERS,
AFFILIATES, REPRESENTATIVES, CONTRACTORS AND EMPLOYEES SHALL NOT BE RESPONSIBLE OR LIABLE
WITH RESPECT TO ANY SUBJECT MATTER OF THIS AGREEMENT OR TERMS AND CONDITIONS RELATED
THERETO UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY, PRODUCT LIABILITY, OR OTHER THEORY:
(A) FOR LOSS OF REVENUE, BUSINESS OR BUSINESS INTERRUPTION; (B) INCOMPLETE, CORRUPT, OR
INACCURATE DATA; (C) COST OF PROCUREMENT OF SUBSTITUTE GOODS, SERVICES OR TECHNOLOGY; (D)
FOR ANY INDIRECT, EXEMPLARY, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES; (E) FOR ANY MATTER
BEYOND FLOCK'S ACTUAL KNOWLEDGE OR REASONABLE CONTROL INCLUDING REPEAT CRIMINAL ACTIVITY
OR INABILITY TO CAPTURE FOOTAGE; OR (F) FOR ANY AMOUNTS THAT, TOGETHER WITH AMOUNTS
ASSOCIATED WITH ALL OTHER CLAIMS, EXCEED THE FEES PAID AND/OR PAYABLE BY CUSTOMER TO FLOCK
FOR THE SERVICES UNDER THIS AGREEMENT IN THE TWELVE (12) MONTHS PRIOR TO THE ACT OR OMISSION
THAT GAVE RISE TO THE LIABILITY, IN EACH CASE, WHETHER OR NOT FLOCK HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY OF SECTION ONLY APPLIES TO THE EXTENT
ALLOWED BY THE GOVERNING LAW OF THE STATE REFERENCED IN SECTION 11.6. NOTWITHSTANDING
ANYTHING TO THE CONTRARY, THE FOREGOING LIMITATIONS OF LIABILITY SHALL NOT APPLY (1) IN THE EVENT
OF GROSS NEGLIGENCE OR WILLFUL MISCONDUCT, OR (11) INDEMNIFICATION OBLIGATIONS.
9.2 Responsibility. Each Party to this Agreement shall assume the responsibility and liability for the acts and omissions of
its own employees, officers, or agents, in connection with the performance of their official duties under this Agreement. Each
Party to this Agreement shall be liable for the torts of its own officers, agents, or employees.
9.3 Flock Indemnity. Flock shall indemnify and hold harmless Customer, its agents and employees, from liability of any
kind, including claims, costs (including defense) and expenses, on account of: (i) any copyrighted material, patented or
unpatented invention, articles, device or appliance manufactured or used in the performance of this Agreement; or (ii) any
damage or injury to property or person directly caused by Flock's installation of Flock Hardware, except for where such
damage or injury was caused solely by the negligence of the Customer or its agents, officers or employees. Flock's
performance of this indemnity obligation shall not exceed the fees paid and/or payable for the services rendered under this
Agreement in the preceding twelve (12) months.
10. INSTALLATION SERVICES AND OBLIGATIONS
10.1 Ownership of Hardware. Flock Hardware is owned and shall remain the exclusive property of Flock. Title to any
Flock Hardware shall not pass to Customer upon execution of this Agreement, except as otherwise specifically set forth in
this Agreement. Except as otherwise expressly stated in this Agreement, Customer is not permitted to remove, reposition,
re -install, tamper with, alter, adjust or otherwise take possession or control of Flock Hardware. Customer agrees and
understands that in the event Customer is found to engage in any of the foregoing restricted actions, all warranties herein
shall be null and void, and this Agreement shall be subject to immediate termination for material breach by Customer.
Customer shall not perform any acts which would interfere with the retention of title of the Flock Hardware by Flock. Should
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Customer default on any payment of the Flock Services, Flock may remove Flock Hardware at Flock's discretion. Such
removal, if made by Flock, shall not be deemed a waiver of Flock's rights to any damages Flock may sustain as a result of
Customer's default and Flock shall have the right to enforce any other legal remedy or right.
10.2 Deployment Plan. Flock shall advise Customer on the location and positioning of the Flock Hardware for optimal
product functionality, as conditions and locations allow. Flock will collaborate with Customer to design the strategic
geographic mapping of the location(s) and implementation of Flock Hardware to create a deployment plan ("Deployment
Plan"). In the event that Flock determines that Flock Hardware will not achieve optimal functionality at a designated location,
Flock shall have final discretion to veto a specific location, and will provide alternative options to Customer.
10.3 Changes to Deployment Plan. After installation of Flock Hardware, any subsequent requested changes to the
Deployment Plan, including, but not limited to, relocating, re -positioning, adjusting of the mounting, removing foliage,
replacement, changes to heights of poles will incur a fee according to the reinstall fee schedule located at
(httos,,//www.flocksafet .com/`rei�:nstall-fee,-schiedule . Customer will receive prior notice and confirm approval of any such
fees.
10.4 Customer Installation Obligations. Customer is responsible for any applicable supplementary cost as described in
the Customer Implementation Guide, attached hereto as Exhibit C. Customer represents and warrants that it has, or shall
lawfully obtain, all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the
designated locations and to make any necessary inspections or maintenance in connection with such installation.
10.5 Flock's Obligations. Installation of any Flock Hardware shall be installed in a professional manner within a
commercially reasonable time from the Effective Date of this Agreement. Upon removal of Flock Hardware, Flock shall
restore the location to its original condition, ordinary wear and tear excepted. Flock will continue to monitor the performance
of Flock Hardware for the length of the Term. Flock may use a subcontractor or third party to perform certain obligations
under this Agreement, provided that Flock's use of such subcontractor or third party shall not release Flock from any duty or
liability to fulfill Flock's obligations under this Agreement.
11. MISCELLANEOUS
11.1 Compliance With Laws. Parties shall comply with all applicable local, state and federal laws, regulations, policies and
ordinances and their associated record retention schedules, including responding to any subpoena request(s).
11.2 Severability. If any provision of this Agreement is found to be unenforceable or invalid, that provision will be limited or
eliminated to the minimum extent necessary so that.this Agreement will otherwise remain in full force and effect.
11.3 Assignment. This Agreement is not assignable, transferable or sublicensable by either Party, without prior consent.
Notwithstanding the foregoing, either Party may assign this Agreement, without the other Party's consent, (i) to any parent,
subsidiary, or affiliate entity, or (ii) to any purchaser of all or substantially all of such Party's assets or to any successor by
way of merger, consolidation or similar transaction.
11.4 Entire Agreement. This Agreement, together with the Order Form(s), the reinstall fee schedule
(htt2s-, �'Ww iv.flo ksa et .com/reinstall-fee-schedule and any attached exhibits are the complete and exclusive statement of
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
the mutual understanding of the Parties and supersedes and cancels all previous or contemporaneous negotiations,
discussions or agreements, whether written and oral, communications and other understandings relating to the subject
matter of this Agreement. All waivers and modifications must be in a writing signed by both Parties, except as otherwise
provided herein. None' of Customer's purchase orders, authorizations or similar documents will alter the terms of this
Agreement, and any such conflicting terms are expressly rejected. Any mutually agreed upon future purchase order is
subject to these legal terms and does not alter the rights and obligations under this Agreement, except that future purchase
orders may outline additional products, services, quantities and billing terms to be mutually accepted by Parties. In the event
of any conflict of terms found in this Agreement or any other terms and conditions, the terms of this Agreement shall prevail.
Customer agrees that Customer's purchase is neither contingent upon the delivery of any future functionality or features nor
dependent upon any oral or written comments made by Flock with respect to future functionality or feature.
11.5 Relationship. No agency, partnership, joint venture, or employment is created as a result of this Agreement and
Parties do not have any authority of any kind to bind each other in any respect whatsoever. Flock shall at all times be and
act as an independent contractor to Customer.
11.6 Governing Law; Venue. This Agreement shall be governed by the laws of the state in which the Customer is located.
The Parties hereto agree that venue would be proper in the chosen courts of the State of which the Customer is located.
The Parties agree that the United Nations Convention for the International Sale of Goods is excluded in its entirety from this
Agreement.
11.7 Special Terms. Flock may offer certain special terms which are indicated in the Order Form and will become part of
this Agreement, upon Customer's prior written consent and the mutual execution by authorized representatives ("Special
Terms"). To the extent that any terms of this Agreement are inconsistent or conflict with the Special Terms, the Special
Terms shall control.
11.8 Publicity. Upon prior written consent, Flock has the right to reference and use Customer's name and disclose the
nature of the Services in business and development and marketing efforts. Nothing contained in this Agreement shall be
construed as conferring on any Party, any right to use the other Party's name as an endorsement of product/service.
11.9 Feedback. If Customer or Authorized End User provides any suggestions, ideas, enhancement requests, feedback,
recommendations or other information relating to the subject matter hereunder, Agency or Authorized End User hereby
assigns to Flock all right, title and interest (including intellectual property rights) with respect to or resulting from any of the
foregoing.
11.10 Export. Customer may not remove or export from the United States or allow the export or re-export of the Flock IP or
anything related thereto, or any direct product thereof in violation of any restrictions, laws or regulations of the United States
Department of Commerce, the United States Department of Treasury Office of Foreign Assets Control, or any other United
States or foreign Customer or authority. As defined in Federal Acquisition Regulation ("FAR"), section 2.101, the Services,
the Flock Hardware and Documentation are "commercial items" and according to the Department of Defense Federal
Acquisition Regulation ("DFAR") section 252.2277014(a)(1) and are deemed to be "commercial computer software" and
"commercial computer software documentation." Flock is compliant with FAR Section 889 and does not contract or do
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
business with, use any equipment, system, or service that uses the enumerated banned Chinese telecommunication
companies, equipment or services as a substantial or essential component of any system, or as critical technology as part
of any Flock system. Consistent with DFAR section 227.7202 and FAR section 12.212, any use, modification, reproduction,
release, performance, display, or disclosure of such commercial software or commercial software documentation by the
U.S. Government will be governed solely by the terms of this Agreement and will be prohibited except to the extent
expressly permitted by the terms of this Agreement.
11.11 Headings. The headings are merely for organization and should not be construed as adding meaning to the
Agreement or interpreting the associated sections.
11.12 Authority. Each of the below signers of this Agreement represent that they understand this Agreement and have the
authority to sign on behalf of and bind the Parties they are representing upon the Effective Date.
11.13 Conflict. In the event there is a conflict between this Agreement and any applicable statement of work, or Customer
purchase order, this Agreement controls unless explicitly stated otherwise.
11.14 Notices. All notices under this Agreement will be in writing and will be deemed to have been duly given when
received, if personally delivered; when receipt is electronically confirmed, if transmitted by email; the day after it is sent, if
sent for next day delivery by recognized overnight delivery service; and upon receipt to the address listed on the Order
Form (or, if different, below), if sent by certified or registered mail, return receipt requested.
11.15 Non -Appropriation. Notwithstanding any other provision of this Agreement, all obligations of the
Customer under this Agreement which require the expenditure of public funds are conditioned on the
availability of said funds appropriated for that purpose. To the extent applicable, Customer shall have the right
to terminate this Agreement for non appropriation with thirty (30) days written notice without penalty or other
cost.
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
1170 HOWELL MILL ROAD,.NW SUITE 210
ATLANTA, GA 30318
ATTN: LEGAL DEPARTMENT
EMAIL: legal@flocksafety.com
Customer NOTICES ADDRESS:
ADDRESS:
ATTN:
EMAIL:
PDFConvers ion e5b563e5-69e9-42ae-8328-5a 140a28 b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
EXHIBIT B
INSURANCE
Required Coverage. Flock shall procure and maintain for the duration of this Agreement insurance against claims for
injuries to persons or damages to property that may arise from or in connection with the performance of the services under
this Agreement and the results of that work by Flock or its agents, representatives, employees or subcontractors. Insurance
shall be placed with insurers with a current A. M. Best rating of no less than "A" and "VII". Flock shall obtain and, during the
term of this Agreement, shall maintain policies of professional liability (errors and omissions), automobile liability, and
general liability insurance for insurable amounts of not less than the limits listed herein. The insurance policies shall provide
that the policies shall remain in full force during the life of the Agreement. Flock shall procure and shall maintain during the
life of this Agreement Worker's Compensation insurance as required by applicable State law for all Flock employees. For
the avoidance of doubt, all required insurance limits by
Customer can be met through a combination of primary and excess/umbrella coverage.
Types and Amounts Required. Flock shall maintain, at minimum, the following insurance coverage for the duration of this
Agreement:
(i) Commercial General Liability insurance written on an occurrence basis with minimum limits of One Million Dollars
($1,000,000) per occurrence and Two Million Dollars ($2,000,000) in the aggregate for bodily injury, death, and property
damage, including personal injury, contractual liability, independent contractors, broad -form property damage, and product
and completed operations coverage;
(ii) Umbrella or Excess Liability insurance written on an occurrence basis with minimum limits of Ten Million Dollars
($10,000,000) per occurrence and Ten Million Dollars ($10,000,000) in the aggregate;
(iii) Professional Liability/Errors and Omissions insurance with minimum limits of Five Million Dollars ($5,000,000) per
occurrence and Five Million Dollars ($5,000,000) in the aggregate;
(iv) Commercial Automobile Liability insurance with a minimum combined single limit of One Million Dollars ($1,000,000)
per occurrence for bodily injury, death, and property coverage, including owned and non -owned and hired automobile
coverage; and
(v) Cyber Liability insurance written on an occurrence basis with minimum limits of Five Million Dollars ($5,000,000).
PDFConversione5b563e5-69e9-42ae-8328-5a 140a28b4f8.doc
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Implementation Timeline
Flock Safety Team
Implementation Service briefs: Existing Infrastructure 6
vs Standard vs Advanced
• Existing Infrastructure Implementation
Standard Implementation
• Advanced Implementation
Things to Consider When Selecting Locations 12
Customer Responsibilities: AC -Powered Cams ............ .. ,,. 14
Electrician Handout 15
• Electrician Installation Steps
• FAQs about AC -Powered Flock Cameras
Installation Service Brief Summary 18
Permitting: Pre -Install Questionnaire 19
1. Timeline
2. Right of Way
3. AC Power vs. Solar
4. Traffic Control & Installation Methods
5. Paperwork & Required Forms
6. Contacts
*Fee Schedule 21
Help Center ................ 22
Customer Support 22
CUSTOMER IMPLEMENTATION GUIDE: LAW ENFORCEMENT frock safety 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
This timeline provides general guidance and understanding of your Installation
process. While we typically complete installations 6-8 weeks after locations have
been finalized, delays can occur as noted in the timeline below:
REVIEW LOCATIONS 40 Confirm Camera Locations With Your Sales Representative
FLOCK: Your sales representative will present several viable options for camera locations
CUSTOMER: Review Deployment Plan & approve camera locations
Pl EASE. DOTE: If Public Works is required to move forward, please obtain approval
FINALIZE LOCATIONS 0 Prepare For Finalized Camera Locations
FLOCK: Confirm Deployment Plane and signed agreement. Flock will move forward with
next steps for locations that don't need permits (minimum 10 locations needed to move
forward with partial installation)
CUSTOMER: Prepare the below items, as needed
• If permits are required, begin application process
• If camera will be AC -powered, hire an electrician/street department
STEP 1 0 Conduct On -site Survey & Place Flags
FLOCK: Flock technician conducts site survey to (1) evaluate/reconfirm solar or power
access, (2) check line of sight to the road, and (3) evaluate/reconfirm cellular service in
the area. When the technician deems the locations suitable, s/he will place a white flag
at each spot
Pi. EASENOTE: If the initially determined locations don't meet Flock standards, we will
evaluate a new location, obtain customer approval, and redo a site survey. This may
push timeline for installation
STEP 2 40 Call 811
FLOCK: Flock Safety will coordinate with Call 811 to mark each camera location for
underground utilities within a 10-foot radius
PM,,,.EASE N011: Call 811 is a government service, so turnaround times may vary and is
outside of Flock control
STEP 3 lb Schedule Installation
FLOCK: Flock will (1) ship any site specific material that the technician does not have
locally (2) schedule the installation date
STEP 4 ft Install & Validate Cameras
FLOCK: After installation, your Onboarding Specialist will confirm that cameras are
capturing footage well and functioning properly. They will then give you full access to
the system along with helpful training resources
ONGOING -AS NEEDED 6 Finalize Any installation Needs
FLOCK: While we typically complete installations within 4 weeks of finalizing locations,
delays may occur due to external factors. In these instances, we will continue to work
through this process until your cameras are fully installed and operational
flock safety 1 2
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
fi'ock safety
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-BE12-BB615271237B
Agreement No. 7166
ME -
Your Project Manager is your primary contact
during camera installation.
Your project manager will guide you through the
entire installation process, keeping you apprised
of all implementation updates as well as answering
any questions you have during this time. They will
Project Manager ensure that all the cameras are on the ground and
operating for at least 48 hours before transitioning
you to your Customer Success Manager.
• The Field Operations team is responsible for the
Y physical installation and maintenance of
cameras and associated equipment provided by
Flock. This includes a large team of technicians,
schedulers, and many others involved in
ensuring the delivery of the product.
Field Operations They take the technical plan you finalized with
Team Product Implementation and work closely with
other teams at Flock to make sure that the
cameras are installed quickly and safely and in
a way that maximizes the opportunity to solve
crime at a specific location.
• *Note*: For all Installation questions or
concerns, please always direct them to your
Customer Success Manager and not the
technician.
flock safety 3
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Your Customer Success Manager is your strategic
partner for your lifetime as a Flock customer.
While the cameras are getting installed, your CSM
will help get your account set up and get all key
users trained on the system.
1'
Customer Success Post -Camera -Installation, your CSM will be your
Manager go -to for most account -related needs: You should
reach out to them to:
• Set up Account Training
• Understand benefits of features
• Learning best practices for getting relevant
d ata
• Identifying opportunities to expand the security
network in your area
w Provide feedback on your partnership with
Flock
The Flock Safety Support team is committed to
answering all your day-to-day questions as quickly
� as possible. To get in touch with support, simply
J
email support@flolcksafety.com or call
866-901-1781 Mon -Fri 8am-8pm EST.
Support can help you:
Flock Safety • Request camera maintenance
Support • Troubleshoot online platform
• Contract / Billing questions
• Update account information
• Camera Sharing questions
o Quick "How to" questions in your Flock Account
flock safety 4
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
!I.
If the Flock cameras need to be AC powered, you
Electrician/Street
(customer) are responsible for providing an
Department
electrician to ensure power connectivity
To weigh in on the use of public Rights of Way or
Public Works (LE)
property
Department of
Transportation
If installation in your area requires permitting
(DOT), City, or
County agencies
PLEASE NOTE: On some occasions, third parties outside of Flock Safety
may be (or need to be) involved in your implementation.
frock safety 1 5
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Nlow, AM � M
frock safety 1 6
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-BE12-BB615271237B
Agreement No. 7166
COST: $150 per camera (one time cost)
Included In Scope:
Once designated locations are approved by the customer, as part of the Existing
Infrastructure Implementation Service Flock will perform the following:
• An in -person site survey to confirm the installation feasibility of a location
(location assessment, solar assessment, visibility review, etc.)
o Cameras need sufficient power. Since a solar panel is required per camera,
it can prevent adequate solar power if two cameras and two solar panels
are on a single pole (blocking visibility). Therefore
if relying on solar power, only one camera can be installed per pole.
• Confirm that a location is safe for work by following State utility locating
procedures.
• Each installation may include the following:
o Installation of camera and solar panel or AC adapter box on a suitable
existing pole
■ Types of existing infrastructure such as existing utility, light, and traffic
signal poles.
■ Pole no higher than 8'-12' (approval at Flock Safety's discretion)
■ Flock will provide and mount an AC adapter unit that a qualified
electrician can connect to AC power following our electrical wiring
re uirments. Flock is unable to make any AC connections or
boreholes in any material other than dirt, grass, loose gravel (or other
non-diggable material). Electrical work requiring a licensed electrician
and associated costs, not included in the scope.
o Access requiring up to a 14' using an A -frame ladder
o Standard MUTCD traffic control procedures performed by a Flock
technician
• Obtain a business license to operate in the city and state of camera location
f1'ock safety 1 7
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Out Of Scope:
By default, Flock does not include the following as part of the Existing
Infrastructure Implementation Service but can provide a quote for sourcing at
an additional cost:
• Mounting on mast arms (always require bucket truck and traffic control)
• Call 811 'Call -before -you -Dig' system
• Installation of any poles including but not limited to
o Standard, 12' above grade Flock breakaway pole
o NCHRP 350 or MASH approved pole (as may be required for locations in
DOT right of way)
• A Bucket Truck for accessing horizontal/cross-beams and/or height above 14'
• Special equipment rentals for site access
• Site -specific engineered traffic plans
• Third -party provided traffic control
• State or city -specific specialty contractor licenses or unique attachment/
connection requirements
• Custom engineered drawings
• Electrical work requires a licensed electrician.
o Flock will provide and mount an AC adapter that a qualified electrician can
connect to AC power but cannot make any AC connections or boreholes in
any material other than dirt, grass, loose gravel (or other non-diggable
material).
• Concrete cutting
• Private utility search for privately owned items not included in standard 811
procedures (communication, networking, sprinklers, etc.)
• Upgrades to power sources to ready them for Flock power (additional fuses,
switches, breakers, etc.)
• Any fees or costs associated with filing for required city, county, or state
permits
• Licensing or attachment agreements with asset / infrastructure owners
• Utility contracts and billing
• Customer requested relocations (see fee schedule)
f fock safety I 8
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
COST: $650 per camera (one time cost)
Included In Scope:
Once designated locations are approved by the customer, as part of the
Standard Implementation Service Flock will perform the following:
• An in -person site survey to confirm the installation feasibility of a location
(location assessment, solar assessment, visibility review, etc.)
• Confirm that a location is safe for work by following state utility locating
procedures. Work with local utilities to prevent service interruptions
during the installation
o Engage 811 'Call -before -you -Dig' system to receive legal dig date
o Apply approved markings Coordinate with 811 regarding any necessary
high -risk dig clearances or required vendor meets
• Each installation may include the following:
o Installation of camera and solar panel with standard 12' above radle
Flock breakawa!y pole
o Installation of camera and AC adapter that a qualified electrician can connect
to AC power on a suitable existing pole, no higher than 8-12' (approval at
Flock Safety's discretion)
I Flock will provide and mount an AC adapter that a qualified electrician can
connect to AC power following our electrical wiring re uirements. Flock
is unable to make any AC connections or boreholes in any material other
than dirt, grass, loose gravel (or other non-diggable material). Electrical
work requiring a licensed electrician and associated costs, not included in
the scope.
o Access requiring up to a 14' A -frame ladder
o Standard MUTCD traffic control procedures performed by a Flock technician
• Obtain a business license to operate in the City and State of camera location
frock safety 1 9
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Out Of Scope:
By default, Flock does not include the following as part of the Standard
Implementation Service but can provide a quote for sourcing at an additional cost:
• Use and/or mounting to existing infrastructure.
• NCHRP 350 or MASH approved pole (as may be required for locations in DOT
right of way)
• A Bucket Truck for accessing horizontal/cross-beams and/or height above 14'
• Special equipment rentals for site access
• Site -specific engineered traffic plans
• Third -party provided traffic control
• State or city -specific specialty contractor licenses
• Custom engineered drawings
• Electrical work requires a licensed electrician.
o Flock will provide and mount an AC adapter that a qualified electrician can
connect to AC power but cannot make any AC connections or boreholes in
any material other than dirt, grass, loose gravel (or other non-diggable
material).
• Concrete cutting
• Private utility search for privately owned items not included in standard 811
procedures (communication, networking, sprinklers, etc.)
frock safety
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
• Upgrades to power sources to ready them for Flock power (additional fuses,
switches, breakers, etc.)
• Any fees or costs associated with filing for required city, county, or state
permits
• Licensing or attachment agreements with asset / infrastructure owners
• Utility contracts and billing
• Customer requested relocations (see fee schedule)
frock safety 1 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
COST: $1,900 per camera (one time cost)
Included In Scope:
Once Designated Locations are confirmed, as part of the Advanced
Implementation Service, Flock will perform the following:
• An in -person site survey to confirm the installation feasibility of a location
(location assessment, solar assessment, visibility review, etc.)
• Confirm that a location is safe for work by following State utility locating
procedures. Work with local utilities to prevent service interruptions during
the installation
o Engage 811 `Call -before -you -Dig' system to receive legal dig date
o Apply approved markings Coordinate with 811 regarding any necessary
high -risk dig clearances or required vendor meets
• Each installation may include the following:
o Installation of camera and solar panel on a suitable NCHRP 350 or MASH
approved pole.
o Installation of camera and AC adapter that a qualified electrician can
connect to AC power.
■, Flock will provide and mount an AC adapter that a qualified electrician
can connect to AC power following our electrical wiring re uirements.
Flock cannot make any AC connections or boreholes in any material
other than dirt, grass, loose gravel (or other non-diggable material).
10
Electrical work requiring a licensed electrician and associated costs,
not included in the scope.
o Access requiring up to a 14' A -frame ladder
o Standard MUTCD traffic control procedures performed by a Flock
technician
• Obtain a business license to operate in the City and State of camera location
frock safety 1 11
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-BE12-BB615271237B
Agreement No. 7166
Out Of Scope:
By default, Flock does not include the following as part of the Advanced
Implementation Service but can optionally provide a quote for sourcing
(additional cost):
• Installation on Standard 12' above grade Flock breakaway pole or existing
infrastructure.
• A Bucket Truck for accessing horizontal/cross-beams and/or height above 14'
• Special equipment rentals for site access
• Site -specific engineered traffic plans
• Third -party provided traffic control
• State or City -specific specialty contractor licenses
• Custom engineered drawings
• Electrical work requires a licensed electrician. Flock will provide and mount an
AC adapter that a qualified electrician can connect to AC power but cannot
make any AC connections or boreholes in any material other than dirt, grass,
loose gravel (or other non-diggable material).
• Concrete cutting
• Private utility search for privately owned items not included in standard 811
procedures (communication, networking, sprinklers, etc.)
• Upgrades to power sources to ready them for Flock power (additional fuses,
switches, breakers, etc.)
• Fees or costs associated with filing for required City, County, or State permits
frock safety 1 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Things to Consider When Selecting Loca,tions
Falcon Cameras
Use Cases
o Flock LPRs are designed to capture images
of rear license plates aimed in the direction
of traffic.
o Flock LPRs are not designed to capture
pedestrians, sidewalks, dumpsters, gates,
other areas of non -vehicle traffic,
intersections.
Placement
o They capture vehicles driving away from an intersection.
o They cannot point into the middle of an intersection.
o They should be placed after the intersection to prevent
stop and go motion activation or "stop and go" traffic.
* Mounting
o They can be mounted on existing utility, light, traffic signal poles, or 12 foot
Flock poles.*
o They should be mounted one per pole.** If using AC power, they can be
mounted 2 per pole.
• They can be powered with solar panels or direct wire -in AC Power (no
outlets).***
• They will require adequate cellular service using AT&T or T-Mobile to be able to
process & send images.
fi'ock safety 1 12
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
* Permitting (or permission from pole owner) may be required to use existing infrastructure or install in specific areas,
depending on local regulations & policies.
** Cameras need sufficient power. Since a solar panel is required per camera, it can prevent adequate solar power if two
cameras and two solar panels are on a single pole (blocking visibility). Therefore if relying on solar power, only one
camera can be installed per pole.
*** Flock does not provide Electrical services. Once installed, the agency or community must work with an electrician to
wire the cameras. Electrician services should be completed within two days of installation to prevent the camera from
dying.
frock safety 1 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Solar Panels
Solar panels need unobstructed southern -facing
views.
z,
If a location requires a "DOT Pole" (i.e., Advanced
Pole, not Flock standard pole), the implementation
cost will be $5,000/camera.
fi'ock safety 1 13
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Ulustomer Responsibilities: AC -Powered
ms
If the Flock cameras need to be AC -powered, the customer is responsible for
acquiring an electrician and ensuring they connect the camera to power. See steps
2 and 6 below.
frock safety 1 14
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
1. Create a Deployment Plan
Work with us to select the best location(s) for Flock Safety cameras
and power sources
IL2. Acquire an Electric Quote
Contact an electrician to receive a quote to run 120volt AC power to
120v the camera
IM3. Sign Flock Safety Agreement
Sign the Flock Safety purchase order to begin the installation of
cameras
Ex 4. Conduct Site Survey
X3 Flock will mark camera locations, locate underground utilities and
mark if present
5. Install Camera
Flock will install the camera and AC power kit at the specified
camera location
6. Connect Camera to Power
Notify the electrician that the camera is ready for the power
connection installation
frock safety 1 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Electrician installation Steps
1. Run AC cable and conduit to the box
according to NEC Article 300 and any
applicable local codes. The gland
accepts'/2' conduit.
2. Open the box using hinges.
3. Connect AC Mains per wiring diagram
below:
a. Connect AC Neutral wire to the Surge Protector white Neutral wire using the
open position on the lever nut.
b. Connect AC Line wire to the Surge Protector black Line wire using the open
position on the lever nut.
c. Connect AC Ground wire to the Surge Protector green ground wire using the
open position on the lever nut.
4. Verify that both the RED LED is lit on the front of the box
5. Close box and zip tie the box shut with the provided zip tie
6. While still on -site, call Flock, who will remotely verify that power is working
correctly:
Southeast Region - (678) 562-8766
West -Region - (804) 607-9213
Central & NE Region - (470) 868-4027
120VAC
FROM LIGHT POLE
SURGE PROTECTOR AC/DC CONVERTER 24V BOW RED PANEL LIGHT CAMERA
M
fi'ock safety 1 15
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
FA Os about AC -Powered Flock Cameras
What voltage is supported?
The AC kit is designed to work with 120VAC Infrastructure by default. A 240VAC
version is available on request.
How much power does this consume?
Peak current draw is 1.5 A at 120VAC. The average power draw is roughly 30W in
high traffic conditions but maybe lower when fewer vehicles are present.
Who is responsible for contracting the electrician?
The customer is responsible for contracting an electrician. We can help answer
questions, but the customer is responsible for identifying and contracting an
electrician.
Who is responsible for maintenance?
Flock will handle all maintenance related to Flock's camera and power equipment.
However, any problems with the electrical supply are the customer's responsibility.
The AC junction box has two lights to indicate the presence of power and make it
easy for quick diagnosis if there is a problem related to the AC power source.
• If the camera indicates to Flock that there is a power supply problem, Flock
will notify the customer and request that the customer verifies the lights on
the AC junction box. If the AC Source light is illuminated, Flock will send a
technician to investigate. If the AC source light is not illuminated, the
customer should check any GFCI's or breakers in the supply circuit or call the
electrician who installed the power supply.
How much does it cost?
Work required to bring AC power to each location will be different, so exact pricing
is unavailable. Primary cost drivers include arrow boards and the distance from the
camera location to the AC power source.
What information do I need to provide my electrician?
The Flock deployment plan and these work instructions should be sufficient to
secure a quote. It will be helpful if you know the location of the existing power
infrastructure before creating the deployment plan.
f1'ock safety 1 16
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-BE12-BB615271237B
Agreement No. 7166
Can you plug it into my existing power outlet? The Flock AC power adapter does
not use a standard outlet plug but must be directly wired into the power mains.
While using outlet plugs may be convenient, they can easily be unplugged,
presenting a tampering risk to this critical safety infrastructure.
The electrician can route power directly to the camera with a direct wire -in
connection if an outlet is close to the camera.
How long does this process typically take?
The installation process typically takes 6-8 weeks. To accelerate the process, be
sure to have the electrician perform his work shortly after the Flock technician
finishes installing the camera.
What kind of electrician should I look for?
Any licensed electrician should perform this work, though we have found that those
who advertise working with landscape lighting are most suited for this work.
What happens if the electrician damages the equipment?
The customer is responsible for contracting the electrician. Any liability associated
with this work would be assumed by the customer. If any future work is required at
this site due to the electrical infrastructure or the work performed by the electrician
would be the responsibility of the customer.
When should the electrician perform his work?
Once Flock installs the camera, you will receive an email alert letting you know that
this has been completed. After this, you will need to schedule the electrician to
route power to the pole.
What if my electrician has questions about Flock's AC Kit?
You should share the AC -Power Kit Details packet with the electrician if they have
questions.
What if the AC power is on a timer?
Sometimes the AC power will be on a timer (like used for exterior lighting). Flock
requires that the AC power provided to the camera be constant. The source that the
electrician uses must not be on a timing circuit.
frock safety 1 17
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
Installation Service Brief Summa�ry
Below outlines the statement of work for the Flock Camera Installation:
Flock Cameras & Traffic Control And Any
Online Platform Associated Costs
Mounting Poles *DOT Approved Pole Cost Electrician
& Ongoing Electrical Costs
AC Power Kit (As Needed) Engineering Drawings
Solar Panels (As Needed) Relocation Fees
Site Surveys And Call 811 Contractor Licensing Fees
Scheduling
Installation Labor Costs I Permit Application Processing Fees
Customer Support / Training � Specialist Mounting Equipment
Cellular Data Coverage Bucket Trucks
Maintenance Fees Loss, Theft, Damage To Flock
(Review Fees Sheet For Equipment
More Details)
Data Storage For 30 Days Camera Downtime Due To
Power Outage
***Field Technician Maintenance
For Falcon'" Flex
Excluding Changes During
Initial Installation
Including, But Not Limited
To, **MASH Poles Or
Adapters
Only Applicable For
AC -Powered Cameras
frock safety 1 18
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
*If a location requires a "DOT pole" (i.e., not our standard), the implementation cost will be $5,000/camera; This cost
is applicable for installations in GA, IL, SC, TN, and CA.
**MASH poles: Manual for Assessing Safety Hardware (MASH) presents uniform guidelines for crash testing
permanent and temporary highway safety features and recommends evaluation criteria to assess test results
***If a camera is lost, stolen, or damaged, a replacement device can be purchased at a discounted price of $800
Permitting., Pre -Install Questionnaire
1. Timeline
o In Flock Safety's experience, in-depth permitting requirements can add 2+
months to the installation timeline.
• The SLA for permit document submission is within 15 days from contract
signature date (contract Closed -Won)
2. Right of Way
Will any Flock Safety cameras be installed on the city, state, or power
company -owned poles or in the city, county, or state Right of Way (RoW)?
o What is the RoW buffer?
o Will additional permits or written permission be required from third -party
entities (such as DOT, power companies, public works, etc.)?
Will any cameras be installed on city -owned traffic signal poles (vertical
mass)?
o If yes, please provide heights/photos to determine if a bucket truck is
needed for the installation.
Note: A bucket truck is required if the height exceeds 15 feet tall.
3. AC Power vs. Solar
• If AC powered, is there a 120V power source available, and is there access to
an electrician who can connect the existing wire to the Flock Safety powered
installation kit?
• If solar -powered, consider the size of the solar panel and potential to impact
the visibility of DOT signs/signals:
o Single Panel: 21.25" x 14" x 2" (Length x Width x Depth)
o Double Panel: 21.25" x 28" x 2" (LxWxD)
frock safety 1 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
4, Traffic Control & Installation Methods
• If a bucket truck is required, this typically necessitates an entire lane to be
blocked in the direction of travel. Can you provide a patrol car escort, or will
full traffic control be required?*
PLEASE NOTE: If traffic control is required, you may incur additional costs
due to city/state requirements; Fees will be determined by quotes received.
19
frock safety 1 1
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
If full traffic control is required (cones, arrow boards, etc.):
o Will standard plans suffice, or are custom plans needed? Custom plans
can double the cost, while standard plans can be pulled from the Manual
of Uniform Traffic Control Devices (MUTCD).
o Will a non -sealed copy of the traffic plan suffice? Or does the traffic plan
need to be sealed and/or submitted by a professional engineer?
o Are there state -specific special versions/variances that must be followed?
• If a bucket truck is not required, the shoulder or sidewalk should suffice and
enable Flock Safety to proceed without traffic control systems in place.
o Note: In some states (i.e., arrow boards), sidewalks may require signage. If
signage is mandatory, Will your Public Works department be able to
assist?
5. Paperwork & Required Forms
• Flock Safety will need copies of paperwork to complete before proceeding
(ex., business license applications, encroachment permit applications). We
can save critical time by gathering these documents upfront. We appreciate
your assistance in procuring these.
6. Contacts
• If Flock Safety needs to interface directly with the departments, please share
the contact information of the following departments:
o Permitting
o Public Works
o Traffic Department
fi'ock safety 120
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
After a deployment plan with Designated Locations and equipment has been agreed
upon by both Flock and the Customer, any subsequent changes to the deployment
plan ("Reinstalls") driven by a Customer's request will incur a fee per the table below.
What Services Incur Fees:
* Requested relocations post -approval by customer
* Relocations due to poor performance will be the responsibility of Flock
o If a customer requests a location against the advisement of Flock,
performance issues and any requested relocations will be the responsibility of
the customer.
• Per the contract and absent a defect, in the event that Flock Hardware is lost,
stolen, or damaged, Customer may request that Flock replace the Flock
Hardware at a fee according to the then -current Reinstall policy
https://www.flocksafet .com/reinstall-fee-schedule
* Misc billables for out of scope items for each implementation
frock safety 121
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-BE12-BB615271237B
Agreement No. 7166
Incurred Fees:
* Camera relocation
o Existing infrastructure (non -AC powered).......................................................... $350
o Flock pole (non -AC powered)............................................................................. $750
o Advanced pole (non -AC powered)................................................................... $5000
Replacements
o Camera only as a result of vandalism, theft, or damage .............................. $800
o Pole replacement only as a result of vandalism, theft, or damage
■ Flock pole............................................................................ .............................. $500
• Advanced pole................................................................................................ $5000
o Full replacement as a result of vandalism, theft, or damage
o x Flock pole, camera, and solar (non -AC Powered).. ... ................. .... .. — $1300
Advanced pole, camera, and solar (non -AC Powered) ........................... $5800
+» Trip charge.....................................................................................................................$350
o Examples:
■ Angle adjustment (elective)
m Install additional Flock signage
All fees are per reinstall or required visit (in the case that a reinstall is attempted but
not completed) and include labor and materials. If you have any questions, please
email support@flocksafety.com.
frock safety 122
Docusign Envelope ID: DD7DD6D9-A2A4.4ABF-8E12-BB615271237B
Agreement No. 7166
Help Center
Our Help Center is filled with many resources to help you navigate through the
online platform. Below you will find some common questions and their relevant help
article:
How do I search camera footage?
How do I add a user?
How do I add a vehicle to m own Hot List?
How do I enable browser notifications for Hot List alerts?
How do I get text alerts for Hot List?
How do I reguest camera access from other nearby agencies?
How do I use the National Lookup to search fora plate?
(National Lookup - network of law enforcement agencies that have opted to allow their
network of Flock cameras to be used for searches)
How do I reset m / another user'spassword?
You can reach our customer support team anytime by emailing
support flocksafet .com. They can help answer any "How -To" questions you
may have.
frock safety 12
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Agreement No. 7166
M AV
c k s a f e t"Lff
Customer: CA - El Segundo PD
Legal Entity Name: CA - El Segundo PD
Accounts Payable Email:
Address: 348 Main St El Segundo, California 90245
Hardware and Software Products
Annual recurring amounts over subscription term
Flock Safety Bundles
Solar LPR Combo Bundle
Flock Safety LPR Products
Flock Safety Falcon V
Solar Falcon ® LR
Solar Falcon &
Solar Falcon ® LR
Flock Safety Platform Add Ons
Extended data retention (Up to 1 Year)
Professional Services and One Time Purchases
Flock Safety Professional Services
Professional Services - Existing Infrastructure
Implementation Fee
Professional Services - Solar Bundle Implementation
Fee
Professional Services - Existing Infrastructure
Implementation Fee
EXHIBIT A
ORDER FORM
Initial Term:
12 Months
Renewal Term:
24 Months
Payment Terms:
Net 30
Billing Frequency:
Annual Plan - First Year Invoiced at Signing.
Retention Period:
365 Days
Included
2
Included
Included
9
Included
Included
2
Included
Included
2
Included
Included
1
Included
Subtotal Year 1:
$49,999.98
Annual Recurring Subtotal:
$49,000.00
Discounts:
$5,500.02
Estimated Tax:
$0.00
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-BE12-BB615271237B
The Term for Flock Hardware shall commence upon first installation and validation, except that the Term for any Flock Hardware that requires self -
installation shall c4ni enc°e aslaon extresrsiran q the rl reonent. A the eveed a C uslomer purehasrs more Than one tyT,re olf rloe kHardware, the earliest Term
start dare .xltall e onlr nt Tn the event a vo,ftwar•e rrrsly, the T ernr ,shaall e rnanme ai e srlmn esxecinion +oaf dw dgireuwnt.
Taxe,w shown above aarepn widzed as an aWintate. Actual la a°e area the res,{rraatsib(lh)'rrl"the Oistome n Ais Agreement will aulornalietAlly rerrre°uc� earoxxrcre,rs^lve
rarrsa waxal' teta ns of rh r aler rf tarrGw yeatr or rlre. lrtn rrla.xct f rtla on a1rciTr er i n°rwr (eaek, a "°7lrrtewantl'Trrna') unlz+.w.x eithcrr lrrarty zessr the otlrer l rty
node e, of icon a eanovae ctr lease tipirty (10) dgm prior to the end of the then -current term.
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Billing Schedule Agreement No. 7166
Year 1
At Contract Signing $49,999.98
_.......... .........
Annual Recurring after Year 1 $49,000.00
ContractTotal .m.�����.........._...,,,,.....�............................ ..�-�........�_._,�m�_�
not included
Discounts
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
Docusign Envelope ID: DD7DD6D9-A2A4-4ABF-8E12-BB615271237B
By executing this Order Form, Customer represents and warrants that it has read A*WMMI4(9f 0466
terms and conditions contained in the Master Services Agreement attached.
The Parties have executed this Agreement as of the dates set forth below.
FLOCK GROUP, INC. Customer: CA - El Segundo PD
rZZ.,&
By; _ By:
Mark smith
Name: Name:
General Counsel
Title: Title:
12/9/2024
Date:
Date:
�sa�W. PO Number:
�ro� x�oanaa" '
Garrett Langley
President / CEO
12/9/2024