CONTRACT 4288F AmendmentAgreement No. 4288F
SIXTH AMENDMENT TO
AGREEMENT NO. 4288 BETWEEN
THE CITY OF EL SEGUNDO AND
RANGE MAINTENANCE SERVICE, LLC.
THIS SIXTH AMENDMENT ("Amendment") is made and entered into this 15th day of
December, 2020, by and between CITY OF EL SEGUNDO, a general law city and municipal
corporation existing under the laws of California ("CITY"), and RANGE MAINTENANCE
SERVICE, LLC, a limited liability company ("CONTRACTOR").
Pursuant to Section 18 of Agreement No. 4288 ("Agreement"), the CITY and
CONTRACTOR desire to amend the Agreement to include the scope of work and
rates referenced in the attached Exhibit "A."
2. The parties also desire to extend the term of the Agreement. Effective August 1,
2019, the term of the Agreement is extended an additional eighteen (18) months, so
that the Agreement will now expire on February 1, 2021, unless either party
terminates the Agreement pursuant to Section 8 of the Agreement.
3. This Amendment may be executed in any number of counterparts, each of which will
be an original, but all of which together constitutes one instrument executed on the
same date.
4. Except as modified by this Amendment, all other terms and conditions of the
Agreement will remain the same.
[SIGNATURES ON NEXT PAGE]
Agreement No. 4288F
IN WITNESS WHEREOF the parties hereto have executed this Amendment the day and
year first hereinabove written.
CITY OF EL SEGUNDO.,
Bill Whalen,
Chief of Police
ATTEST:
for
Tracy Weaver,'
City Clerk
APPROVED AS TO FORM:
M 17 1k 1 L7. Ms
City Attorney
2
RANGE MAINTENANCE SERVICE!
a limited liability company
Donna Foggiato,
Owner
Taxpayer ID No. 77-0467548
EXHIBIT A
Wednesday, December 9, 2020
Sgt. Tony DeLaRambelje
EI Segundo Police Department
348 Main Street
EI Segundo, CA 90245
SUBJECT: Reclining Rubber Bullet Trap Maintenance Quote
�� ri� nt No. 4288E
301 Mary Belle Way
Angels Camp, CA 95222
408-209-1223 cell
209-736-9692
"Quality Range Main-tenance
Management Service"
I estimate a total of three (3) to four (4) days of work to separate the rubber material from the bullet
material and for re -packing the Bullet Trap/Hopper with the recycled rubber material.
SCOPE OF WORK:
The following removal actions will be used to extract lead from the rubber material:
• Start raking at the 10 ft. peak base of the Bullet Trap to clean out shotgun wads.
• Commence to remove the rubber, copper jackets/bullet material from the center hot spot
areas of all five (5) -point impact areas of the Bullet Trap. Remove depth of mixed material
which will vary from fourteen inches (14") to sixteen inches (16") deep. Outside of the hot
spots, mining will vary from twelve inches (12") to fourteen inches (14") of mixed material.
• All material will be positioned in a row in front of the Bullet Trap. There should be
approximately ten (10) to twelve (12) cubic yards of material extracted from the twenty -foot
(201) x ten -foot (101) Bullet Trap area.
• Use Range Maintenance Services, LLC, Gran Trap Vacuum to separate bullet material from
the rubber trap material. The vacuum machine will blow the rubber back into the Bullet
Trap through a series of six -inch (611) duct pipes then leaving the bullet material on the floor
to be shoveled into one- gallon containers for transportation.
• Fill hopper in the upper part of the Bullet Trap by utilizing the trap vacuum.
• Shovel and rake rubber media to re-create factory specification sloped angle for Bullet Trap.
• Use customer's extra bags of rubber material to insure proper angle.
• Remove bullet material from premises.
The above-described scope of labor, transportation costs, and transportation of bullet material off
site, and lodging included; all costs and fees for additional insured certificates required by the City of
Agreement No. 4288F
EI Segundo and business license fees required by the City of EI Segundo are also included in the total
cost of work to be performed:
TOTAL COST: $8,300.00
If you have any questions, please contact me.
Donna Foggiato
Range Maintenance Services, LLC
408-209-1223 cell
209-736-9692
jobnfoggiato@comcast.net